Power Plant Lifts – BETCON ELEVATOR PRIVATE LIMITED

Power Plant Elevators

Our specialized mastery empowers us to offer brilliant quality variety of Industrial Elevator Lift for Power Plant. Use for lifting merchandise starting with one story then onto the next, the offered lift is produced at our complex assembling unit under the course of our experts utilizing the best grade material. Furthermore, we test these lift on quality procurements to dispatching an impeccable extent.

Hydraulic elevators are a reliable and space-efficient solution for low- to mid-rise buildings, offering smooth and quiet operation. Unlike traction elevators, they do not require a counterweight, allowing for a more spacious cabin and flexible installation. The engine room can be positioned within 15 meters of the lift, occupying only 3-4 m², making them ideal for buildings with space constraints. Additionally, the foundation bears the lift’s load, ensuring stability even when transporting lighter cargo.

Applications :

The hydraulic mechanism can be installed within 15 meters of the elevator, requiring minimal space.
Eliminates the need for large counterweights, allowing for a more flexible installation.
The elevator's weight and passenger load are supported by the foundation, ensuring stability.
Requires only a small machinery area, preserving valuable building space.
Hydraulic technology ensures smooth and controlled movement with reduced noise and vibrations.

Power plant Elevators - Minimum Civil Dimensions:

LOAD (KG)	CAR INSIDE		LIFT WELL		ENTRANCE	MACHINE ROOM		PIT DEPTH	OVER HEAD
LOAD (KG)	A	B	C	D	E	K	L	PIT DEPTH	OVER HEAD
500	1100	1200	1900	1500	1100	3900	4000	1600	4500
1000	1400	1800	2300	2100	1400	4300	4600	1600	4500
1500	1700	2000	2600	2300	1700	4600	4800	1600	4500
2000	1700	2500	2600	2800	1700	4600	5300	1600	4500
2500	2000	2500	2900	2800	2000	4900	5300	1600	4500
3000	2000	3000	2900	3300	2000	4900	5800	1600	4500
4000	2500	3000	3400	3300	2500	5400	5800	1600	4500
5000	2500	3600	3400	3900	2500	5400	6400	1600	4500

Note: In case of manually operated doors, clear entrance will be reduced by the amount of projection of handle on the landing door.

Note: Dimensions of pit depth and overhead may differ in practice as per individual manufacturer’s design depending upon load, speed and drive. However, the pit depth and overhead shall be such as to conform to the requirements , IS14665

CLIENT SCOPE Detailed Requirements

Three Phase Power Supply

Provide Three Phase Power Supply near control panel with M.C.B. & E.L.C.B.

Scaffolding

Provide scaffolding for entire erection period (approximately 15 days)

Temporary Power Connection

Provide temporary power connection for erection & testing work

Access Permission

Give free access in case work needs to be done after office hours

Shaft Construction

Construct the shaft in accordance with GA Drawing

Earth Points

Provide 2 Earth Points near Control Panel

Shaft Lighting

Provide shaft lighting with plug points

Civil Material & Mason

Provide mason with civil material for minor building work including grouting etc. during erection work

Machine Room Components

Access to Machine room, Machine beams, Supporting beams, Machine room door, Machine room ladder, Loading hook etc.

Elevator Shaft Wall Finishing

Provide Elevator Shaft wall to be plastered & painted

R.C.C. Column Design

4 No. R.C.C. Columns to be designed by client for the given load

Quick Reference

Construct the shaft (230mm brick / 150mm RCC Walls) in accordance with our GA drawings.
Mason with material for minor builder's work such as pocket cutting, grouting, door fixing, etc.
Temporary power connection for erection & testing work.
Scaffolding till the time of erection for about 30 days.
Access to Machine room (if applicable).
Power supply (415 Volts, 3 Phase, 4 Wires with Neutral, 50 Hz. & 230 Volts 1 Phase) near our control panel with MCB/JUNCTION BOX.